The nicety of axial body spare parts machines the small lot in be engaged in with economic means

  • Time:
  • Click:143
  • source:HOTA CNC Machining
Telenhaus craft revealed surface of spare parts of a kind of small lot in be opposite with economic means to have the method of accurate treatment to us. In using Center-Star series machine tool successfully of managing cost change model NC11, to large and medium-sized enterprise, small even company, can exploit the advantage of Superfinish-/Microfinish technique. On agile all-purpose machine tool, spare parts of all axis body, for example, axis of transmission gear case, crankshaft, eccentric shafe, balanced report and allocate an axis, the rule perhaps contains under 700mm or the rack that runs conveyer belt circularly, can have wet or dry treatment with Stein tool. According to treatment the task and spare parts appearance can choose to use 3 or chuck of 2 ungual type, bedspring blocks head or axis of apply the brake, perhaps secure the spare parts between peak value. Use new Center-Star to be able to achieve surface roughness Rz<0.

3 μ M, raise <95% of carring capacity rate, and be improved apparently machine the fluctuation that appears in the process. Putting the part beforehand after the lozenge slideway of buy, close the door of workshop, treatment will be finished automatically. After process control machines periodic end, defend the door can be opened automatically, the spare parts can be gotten off to come. Use at product line is assembled, of the machine lade and uninstall also can be finished with robot or door charger. In clean respect, get on cleaner device outfit to be taken out in order to facilitate in lathe bed, what occupy a space at the same time very small. It can use oil or emulsion drive. Manufacturing business will offer optional to lubricate the least quantity. Manufacturing business thinks, the lathe bed structure in inclined buy of the only in this part special be helpful for blowdown and operation. The basis is finite lathe bed has yuan of law calculative a very tall fixity and have very long life. The process designing through controlling a system is OK and simple agile ground adjusts it is OK that NC axis uses device of a Microfinish so the spare parts with ordinal on numerous position of axle different treatment. Treatment can undertake according to total length. Through module plan can be divided into different treatment unit, and the requirement that the machine can get used to all sorts of tasks neatly however. CNC Milling CNC Machining