The milling cutter of pottery and porcelain with taller efficiency

  • Time:
  • Click:139
  • source:HOTA CNC Machining
Use milling cutter of new-style pottery and porcelain successive treatment makes handling time cut 88% , already managing time, saved fund again. Use milling cutter of new-style pottery and porcelain to be in industry of vinyl material extrusion, company of product of Premium building materials also is produced and maintain the pattern that its oneself use. Recently, this company begins to narrow its machine the dimensions of job shops. This company used a kind of new-style cutting tool treatment, because this is managing many handling time, below circumstance of company staff reductive, did not make production gets however the influence of materiality. The ExceleratorTM milling cutter that Greenleaf Corporation company offers is one kind but the assorted cutting tool that graduation pottery and porcelain sets bit and union of small diameter milling cutter to be together, company of product of Premium building materials can process rolled steel continuously with this kind of cutting tool, make its produced periodic time to decrease 88% . After using this kind of cutting tool, also make this company cancelled two duty on machining center of Okuma Howa company. Changing times the view according to this company inspector general Mr Dan Sheipline, using cutting tool of carbide hard alloy to machine the effect of common steel and special type stainless steel is cannot satisfactory. He is facing problem of tatty of cutting tool excessive, make machined craft and manufacturing cost to be immersed in predicament. The part that place of company of product of Premium building materials produces must satisfy ± 0.

The tolerancepublic errand limits of 02" , treatment is more accordingly sophisticated. Mr Sheipline explanation says: "The exterior quality of our finished product is the most important, need reachs the level of lens face, not be patient of any flaws. Compare with photograph of cutting tool of carbide hard alloy, after the spare parts is being machined, without giving thought to circumstance how, must undertake manual polish, because use the cutting tool treatment that Greenleaf company provides, total meeting is in of the spare parts apparently the mark that leaves cutting tool treatment, need undertakes manual polish. The circumstance that uses cutting tool is not changing impossibly the next time the gender finishs full treatment to operate. " course and connection of manufacturer of much home tool, the cutting tool of Greenleaf company left deep impression to Mr Sheipline. He recollects: "Original, when I and other tool suppliers are contacted, major firm hopes agog to visit us very much, set an example for us the cutting tool that they think to be machined effectively, but after trying cutting through a few, what I do not expect the treatment parameter that discovers their cutting tool. I am not to criticize other tool manufacturer here, but their cutting result lets me cannot be accepted. As to Greenleaf company, they brought cutting tool sample, enquire I need to use what kind of cutting parameter. Then we reached collaboration, they had consideration according to the result, inform me next. " when the province be economical begins to use Excelerator cutting tool when company of product of Premium building materials when, this company realizes OK and a lot of sparer time and money very quickly (see a table) . Mr Sheipline says: "Use this kind of cutting tool we can machine 3~4 continuously spare parts, rotate to set the treatment on bit to another again next. Previously, we must change twice cutting tool ability machines a spare parts. " for this, company of product of Premium building materials purchased a new machine tool again, leadwell company (Plano, TX) MCV-OP machining center, rotate speed can amount to 6 000r/min (the company's original machine tool rotate speed is 4 000r/min) , this means treatment speed to be able to rise further. Mr Sheipline says: "This machine tool can use the dominant position that Excelerator cutting tool brings better. " the EI-Max that Greenleaf company offers cutting tool can the stainless steel of rotate speed cutting with 4000r/min, its feed speed is 70r/min, cutting deepness is 0.

04mm. CNC Milling CNC Machining