5 lines resistor feels the common trouble removal of screen

  • Time:
  • Click:129
  • source:HOTA CNC Machining
5 lines resistor touchs screen and screen of feeling of 4 lines resistor, all use imitate resistor principle its groovy breakdown feature and 4 lines resistor are identical. If you are used, is screen of feeling of 5 lines resistor, what have a problem according to what be as follows please when appearing to install and defend an issue is ordinal decide and solve. Screen position is not exact: Can undertake locating afresh through drive software. Feel the position and screen cursor convert: When installation touchs screen, the position of screen is conversed, the fundamental that gives a clue according to right hand position please adjusts feeling screen position. Feeling screen indication icon moves to a fixed horn all the time: When installation feels monitor, the casing outside the indication of this horn is pressed in feeling region, adjust feeling screen position or shake this position screw. Feel screen cursor to beat in fixed position: Equipment of tall frequency of power source or other affected screen or controller. The first, affirm those who touch screen to give a line to leave high-pressured coil, be isolated from with indication equipment; the 2nd, affirm control blocks insulation, leave monitor the tall radiate part such as the deflexion coil inside circuit board and monitor. Card of feeling screen control was not installed inside LCD monitor, screen produces cursor to beat namely: The likelihood is the PIN that touchs screen, join from what feeling screen extends compressed cable is in namely endure together partly with the discharge of the Bian Yuan of monitor. Means of settlement: It is OK to examine it is difficult that if shift gives PIN to have,shift gives the positional; of PIN, be in please piece thick insulating tape is added below PIN, make PIN and monitor discharge part are kept apart. CNC Milling CNC Machining